Search results

A novel frequency domain approach, which combines the pseudo excitation method modified by the authors and multi-domain Fourier transform (PEM-FT), is proposed for analyzing nonstationary random vibration in this paper.

For a structure subjected to a nonstationary random excitation, the closed-form solution of evolutionary power spectral density of the response is derived in frequency domain.

The deterministic process and random process in an evolutionary spectrum are separated effectively using this method during the analysis of nonstationary random vibration of a linear damped system, only modulation function of the system needs to be estimated, which brings about a large saving in computational time.

The method is general and highly flexible as it can deal with various damping types and nonstationary random excitations with different modulation functions.

This paper aims to propose an efficient and accurate method to analyse the transient heat conduction in a periodic structure with moving heat sources.

The moving heat source is modelled as a localised Gaussian distribution in space. Based on the spatial distribution, the physical feature of transient heat conduction and the periodic property of structure, a special feature of temperature responses caused by the moving heat source is illustrated. Then, combined with the superposition principle of linear system, within a small time-step, computation of results corresponding to the whole structure excited by the Gaussian heat source is transformed into that of some small-scale structures. Lastly, the precise integration method (PIM) is used to solve the temperature responses of each small-scale structure efficiently and accurately.

Within a reasonable time-step, the heat source applied on a unit cell can only cause the temperature responses of a limited number of adjacent unit cells. According to the above feature and the periodic property of a structure, the contributions caused by the moving heat source for the most of time-steps are repeatable, and the temperature responses of the entire periodic structure can be obtained by some small-scale structures.

A novel numerical method is proposed for analysing moving heat source problems, and the numerical examples demonstrate that the proposed method is much more efficient than the traditional methods, even for larger-scale problems and multiple moving heat source problems.

Traditional gas tungsten arc welding (GTAW) and GTAW-based wire and arc additive manufacturing (WAAM) are notably different. These differences are crucial to the process stability and surface quality in GTAW WAAM. This paper addresses special characteristics and the process control method of GTAW WAAM. The purpose of this paper is to improve the process stability with sensor information fusion in omnidirectional GTAW WAAM process.

A wire feed strategy is proposed to achieve an omnidirectional GTAW WAAM process. Thus, a model of welding voltage with welding current and arc length is established. An automatic control system fit to the entire GTAW WAAM process is established using both welding voltage and welding current. The effect of several types of commonly used controllers is examined. To assess the validity of this system, an arc length step experiment, various wire feed speed experiments and a square sample experiment were performed.

The research findings show that the resented wire feed strategy and arc length control system can effectively guarantee the stability of the GTAW WAAM process.

This paper tries to make a foundation work to achieve omnidirectional welding and process stability of GTAW WAAM through wire feed geometry analysis and sensor information fusion control model. The proposed wire feed strategy is implementable and practical, and a novel sensor fusion control method has been developed in the study for varying current GTAW WAAM process.

As known, the wire and arc additive manufacture technique can achieve stable process control, which is represented with periodic surface waviness, when using empirical methods or feedback control system. But it is usually a tedious work to further reduce it using trial and error method. The purpose of this paper is to unveil the formation mechanism of surface waviness and develop a method to diminish it.

Two forming mechanisms, wetting and spreading and remelting, are unveiled by cross-section observation. A discriminant is established to differentiate which mechanism is valid to dominate the forming process under the given process parameters.

Finally, a theoretical method is developed to optimize surface waviness, even forming a smooth surface by establishing a matching relation between heat input (line energy) and materials input (the ratio of wire feed speed to travel speed).

Formation mechanisms are revealed by observing cross-section morphology. A discriminant is established to differentiate which mechanism is valid to dominate the forming process under the given process parameters. A mathematical model is developed to optimize surface waviness, even forming a smooth surface through establishing a matching relation between heat input (line energy) and materials input (the ratio of wire feed speed to travel speed).

The purpose of this article is to attempt to highlight various approaches for enhancing the viability of probiotics, with special emphasis on micro‐encapsulation.

Various techniques, such as selection of acid and bile resistant strains, use of oxygen impermeable packaging materials, two‐step fermentation, stress adaptation, inclusion of micro‐nutrient, sonication of bacteria and micro‐encapsulation, which could be employed for maintaining or enhancing probiotic viability are discussed, with special emphasis on micro‐encapsulation.

Probiotics lose their viability during gastro‐intestinal transit due to unfavorable intestinal environment. Amongst diverse techniques micro‐encapsulation could confer protection to the probiotics both in the product as well as in the gastro‐intestinal environment.

The paper shows that micro‐encapsulation of probiotics renders them stable both in the product as well as in the intestinal environment and application of encapsulated probiotics would result in a product with greater prophylactic activities.

The poor capacity of prefabricated construction cost estimation is the essential reason for the low profitability of the general contractor. Therefore, this study aims to focus on the cost estimation of prefabricated construction as the research object. This research aims to enhance the accuracy of total project cost estimation for general contractors, ultimately leading to improved profitability.

This study used Vensim PLE software to establish a system dynamics model. In the modeling process, a systematic research review was used to identify cost-influencing factors; ABC classification and the analytic hierarchy process were used to score and determine the weights of influencing factors.

The total cost error obtained by the model is less than 2% compared with the actual value. It can be used to cost estimation and analysis. The analysis results indicate that there are 7 key factors, among which the prefabrication rate has the most significant impact. Furthermore, the model can provide the extreme range cost; the minimum cost can reduce by 13% from the value in the case. The factor's value can compose a cost control strategy for general contractors.

The cost of prefabricated buildings can be estimated well, and deciding the prefabrication rate is crucial. The cost can be declined by correct cost control strategies when bidding and subcontracting are in process. The strategies can follow the direction of the model.

A systemic, quantitative and qualitative analysis of cost estimation of prefabricated buildings for general contractors has been conducted. A mathematical model has been developed and validated to facilitate more effective cost-control measures.

This study aims to better understand the morphological characteristics of single particle and the health risk characteristics of heavy metals in PM_2.5 in different functional areas of Handan City.

High resolution transmission electron microscopy was used to observe the aerosol samples collected from different functional areas of Handan City. The morphology and size distribution of the particles collected on hazy and clear days were compared. The health risk evaluation model was applied to evaluate the hazardous effects of particles on human health in different functional areas on hazy days.

The results show that the particulate matter in different functional areas is dominated by spherical particles in different weather conditions. In particular, the proportion of spherical particles exceeds 70% on the haze day, and the percentage of soot aggregates increases significantly on the clear day. The percentage of each type of particle in the teaching and living areas varied less under different weather conditions. Except for the industrial area, the size distribution of each type of particle in haze samples is larger than that on the clear day. Spherical particles contribute more to the small particle size segment. Soot aggregate and other shaped particles contribute more to the large size segment. The mass concentrations of hazardous elements (HEs) in PM_2.5 in different functional areas on consecutive haze pollution days were illustrated as industrial area > traffic area > living area > teaching area. Compared with the other functional areas, the teaching area had the lowest noncarcinogenic risk of HEs. The lifetime carcinogenic risk values of Cr and As elements in each functional area have exceeded residents’ threshold levels and are at high risk of carcinogenicity. Among the four functional areas, the industrial area has the highest carcinogenic and noncarcinogenic risks. But the effects of HEs on human health in the other functional areas should also be taken seriously and continuously controlled.

The significance of the study is to further understand the morphological characteristics of single particles and the health risks of heavy metals in different functional areas of Handan City. the authors hope to provide a reference for other coal-burning industrial cities to develop plans to improve air quality and human respiratory health.

Since megaproject social responsibility (MSR) has received increasing attention in megaproject management and plays critical roles in megaproject practices, the purpose of this paper is to explore how MSR facilitates an improved sustainability of the construction industry.

By integrating multiple theoretical perspectives of transaction cost theory, institutionalism and attention- and resource-based views, and by using survey data of Chinese megaprojects and construction enterprises, this paper offers a theoretical elaboration of and an empirical investigation into the impacts that MSR’s four dimensions exert on industrial improvement in economic sustainability and social responsibility.

The study’s empirical results indicate that MSR has positive impacts on improving the sustainability of the construction industry, and that such positive impacts are weakened by the interactions of primary stakeholders in the megaprojects but are strengthened by the interactions of secondary stakeholders.

This paper suggests that managers and policymakers make efforts to governmental guidance, media monitoring and public participation in megaprojects, so as to limit the potential unethical behaviors in megaproject management and enhance the sociopolitical legitimacy that are essential for the sustainability of the construction industry.

By analyzing the industrial outcomes of MSR, this paper extends studies on the topic beyond the current literature’s focus on the antecedents of MSR, and it enriches the research on MSR stakeholders by elaborating on the contingent roles of the various stakeholders in megaproject management.

The purpose of this paper is to propose a DC-port voltage balance strategy realizing it by logic combination modulation (LCM). This voltage balance strategy is brief and high efficient, which can be used in many power electronic devices adopting the cascaded H-bridge rectifier (CHBR) such as power electronic transformer (PET).

The CHBR is typically as a core component in the power electronic devices to implement the voltage or current conversion. The modulation method presented here is aiming to solve the voltage imbalance problem occurred in the CHBR with more stable work station and higher reliability in ordinary operating conditions. In particular, by changing the switch states smoothly and quickly, the DC-port voltage can be controlled as the ideal value even one of the modules in CHBR is facing the load-removed problem.

By using the voltage balance strategy of LCM, the problem of voltage imbalance occurring in three-phase cascaded rectifiers has been solved properly. With the lower modulation depth, the efficiency of the strategy is shown to be better and stronger. The strategy can work reliably and quickly no matter facing the problem as load-removed change or the ordinary operating conditions.

The limitation of the proposed DC-port voltage balance strategy is calculated and proved, in a three-module CHBR, the LCM could balance the DC-port voltage while one module facing the load-removed situation under 0.83 modulation depth.

This paper provides a useful and particular voltage balance strategy which can be used in the topology of three-phase cascaded rectifier. The value of the strategy is that a brief and reliable voltage balance method in the power electronic devices can be achieved. What is more, facing the problem, such as load-removed, in outport, the strategy can response quickly with no switch jump and switch frequency rising.

Three types of industrial buyer-seller relational process models are available: joining theory, stage theory, and state theory. However, historically, these models have developed based on the knowledge and cultural context of the Western world. Several researchers note that national culture may have an impact on international industrial buyer-seller relationships. Including culture in the models is highly important, especially as the business environment is increasingly more global and different countries have different business cultures. The goal of this paper is to define the most suitable industrial buyer-seller relational process models for describing relationships in various contexts. The paper includes a through literature review and a single case study in order to reach this objective. A new state theory model evolved during the research. It consists of two beginning states: searching and starting; four purely middles states: constant/static, decline, growth, and troubled; and a purely end state: termination. The state of dormant/inert is both a middle state and an end state, that is, when the relational actors are not in contact does not mean that the relationship has ended, but instead, for example, new legislation may have been implemented, which requires the actors to evaluate their relationship and its future. A relationship goes through the two beginning states in the order mentioned above, but after that, any state may occur.